PTZ High Speed Domes Zoom Camera 6" Internal 540 TVL.

High Speed Interior  Domes 6" Internal Dome with 18x Optical 4.1~73.8mm, 12x Digital Zoom, 0.7 Lux, 540 TVL.

6" Day/Night External Intelligent High Speed Dome with 18x Optical, f3.4~119mm, SONY 1010P, 12x Digital Zoom, 540 TV Lines, 0.7Lux and IR sensitive. Pelco D/P
compatible. Auto-run and Line-scan, Pendant, wall and corner and pole mounting brackets.

 
Features:

•SONY 1010P CCD image sensor
•Built-in High-powered DSP design, performance stable,
•High Resolution 480TVL with excellent quality picture,
•the units also can store up to 80 or 128 preset points using a powerless memory function that ensures all preset points are saved, even in the event of power failure.
•Focus length f=3.6mm to 129mm lens
•216x Zoom (18x Optical and 12x Digital Zoom)
•256 programmable preset PTZ positions.
•360° Continuous pan, 180° Auto flip,
•Automatic adjustment of rotating speed in proportion to lens zoom
•Auto iris, auto focus and auto white balance
•Backlight compensation
•Day/Night Color auto shift.
•RS485 control interface for DVR and Keyboard controller to control directly
•Auto Scan between two points: itle, 255 speed grades (the dome camera will return to the home position after a programmed idle time has elapsed.).
•Six sets of programmable tuor focus with 16 position each set. 
•Wall or Ceiling mount capabilities
•Voltage AC24V

RS485 Control Interface  The RS485 interface allows communication up to a total distance of 1200 meters between the speed dome or last speed dome in the network and the final
control point, the joystick or DVR. Control signals are sent to the dome from either a joystick controller.

Multi Protocol support One is also able to control the speed domes from a DVR if it supports any of our speed dome's communication protocols. A long list is supported
including Pelco D, Pelco P, Kalatel, Alec, Samsung, Panasonic, Vicon, Santachi, Lilin, ADT, Hunda, AD, Santachi, Philips, Univision, Diamond, VCL & Molynx . This means the dome
can be integrated into existing CCTV systems or interfaced to new equipment supporting one of these popular protocols. The communication protocol is set up via dip-switches
on the camera's PCB. Various baud-rates can be set up.