NESS D8XCel 3G SECURITY ALARM PANEL WITH LCD KEYPAD

Versatile 8 Zone 3G Alarm System
Flexible 8 Zone control panel & 3G Cellular communicator. The Ness D8Xcel is the most versatile Ness 8 zone control panel ever!
Supplied with 3G Communicator onboard, LCD keypad, plug pack, battery, , housing and manuals.

Feature Include:

• Operation and programming by SMS messaging
• Remote operation and programming via the freeNessXCEL app
• Alarm reporting back to base by CID and/or self monitoring by SMS
• Powerful SMS accessibility including: arm/ disarm, programming, check system status,read alarm memory, receive alarm messages and operate AUX outputs all by SMS / TXT
• Supports up to 10 mobile phone numbers for SMS reporting
• Fully customisable word library for SMS messaging
• All-new KPX and Navigator Keypads supporting cellular operation

Includes Ness Telstra SIM.

Smart Device Apps

Android App: Ness aComms

iOS App: Ness iComms

Android App: Ness XCEL 

iOS App: Ness XCEL 

Control Panel D8XCel

3G MODULE: Dual-Band UMTS/HSPA+ 800(850)/2100MHz Quad-Band GSM/GPRS/EDGE 850/900/1800/1900MHz
SIM CARD TYPE: Standard SIM
BOX DIMENSIONS (W - H - D): 235 x 300 x 90 mm
POWER SUPPLY: 20VDC (Supplied) or 17VAC 1.4 Amp
POWER SUPPLY: 13.8v DC @ 800mA
QUIESCENT CURRENT DRAW: 80mA with 1 keypad
OPERATING VOLTAGE: 17VAC / 15V DC
RECHARGEABLE BATTERY: 12 volt 7.0 Amp/hour Sealed lead Acid
BATTERY CHARGING CURRENT: 350mA maximum, current limited
DYNAMIC BATTERY TEST:  Backup battery is tested under load, hourly and on arming
FUSES: 2 Amp auto resetting  / Siren output & Reset output. 
  500mA auto resetting / 12 volt auxiliary outputs. 
  200 mA auto resetting / Strobe output
ZONE OUTPUTS: 8 zone inputs. 2 x 24hr tamper inputs
END OF LINE RESISTOR: Choice of 12 programmable values including N/C. 
Default 2200 Ohms (2.2k)
MAXIMUM KEYPADS: 3.
INTEGRATED RADIO OPTIONS: Multi-pin connector for the optional Ness Radio Interface. Supports up to 55 Radio keys . Up to 8 radio zones
SERIAL HEADER: Serial data port for direct connect programming using NessCommsTM software. Also 2 way serial data
INTEGRATED ACCESS CONTROL: Multi-pin connector the optional Weigand Interface. Supports up to 3 Ness proximity   access card readers
SIREN OUTPUT: On board siren driver with timed output. Maximum 3 x 8 Ohm horn speakers
STROBE OUTPUT: 12v DC timed output. Maximum 2 x 1 Watt strobe lights
RESET OUTPUT: 12v DC timed output. Max. 3 x 12v piezo screamers
EQUIPMENT POWER OUTPUT: 13.8v DC output for powering detectors and other equipment. Maximum 500mA
AUX READER: Multi-pin connector provides outputs Aux1, Aux2, Aux3, Aux4, 12v DC

Supplied with:
D16XCel panel with onboard 3G Dialler
Ness SIM Card Included
LCD Keypad
20VDC Power Supply
12V 7 A/H Back Up Battery
Housing
Manuals.